Tylo Prime Plus 99 Manuel D'utilisation page 6

Bench valance (Box 1):
• Insert the bench valance between the left and right wall panel sections.
• Connect the S-3 electrical supply to the S-3 junction box.
• Fix the cover of the S-3 junction box with 2 Phillips screws.
Slide the fan component (Box 1) into
the support on the bench valance.
Connect the white connection on the black
junction box to the white connection on the fan.
Black main junction box: (2) connections
Locate the black main junction box that is fixed to the internal floor of the sauna.
1. Insert the 24 pin, multicoloured cable plug into the left hand side of the main junction box.
2. The ON/ OFF switch is on the right hand side of the main junction box.
Set the switch as shown above to the ON (EIN) position.
3. Connect the loudspeaker input and output.
Note – Do NOT insert the 230 volt alternating current cable into the socket yet.
See point 3 -
Input/output
Page 6