Stanley SB25PT-05 Manuel D'instructions page 21

4.4.2 FUEL GAGE BATTERY PACKS
Some DEWALT battery packs include a fuel
gauge which consists of three green LED lights
that indicate the level of charge remaining in the
battery pack. The fuel gauge is an indication of
approximate levels of charge remaining in the
battery pack according to the following indicators:
To actuate the fuel gauge, press and hold the fuel
gauge button. A combination of the three green
LED lights will illuminate designating the level
of charge left. When the level of charge in the
battery is below the usable limit, the fuel gauge
will not illuminate, and the battery will need to be
recharged.
NOTE: The fuel gauge is only an indication
of the charge left on the battery pack. It does
not indicate tool functionality and is subject
to variation based on product components,
temperature and end-user application. For more
information regarding fuel gauge battery packs,
please contact call 1-800-4-DEWALT (1-800-433-
9258) or visit our website www.DEWALT.com.
5. OPERATING PROCEDURE
On speed fastening tools, the nose equipment always consists of three elements: a nose jaw, a mandrel
and a mandrel follower spring. All three items are matched to the fastener being placed and to the hole
size in the application.
WARNING: It is essential that the correct nose equipment is fi tted to the tool to ensure both
effective placing of the fastener and SAFE operation of the tool. READ THE SAFETY WARNINGS
carefully
WARNING: Always observe the safety instructions and applicable regulations.
WARNING: To reduce the risk of serious personal injury, disconnect battery pack before making
any adjustments or removing/installing attachments or accessories
WARNING: To reduce the risk of serious personal injury, ALWAYS use proper hand position.
WARNING: To reduce the risk of serious personal injury, ALWAYS hold securely in anticipation of
a sudden reaction.
5.1 PROPER HAND POSITION
Proper hand position requires one hand on the main handle (j) fi g. A. The tool can be operated with either
the left or right hand.
5.2 LOADING THE TOOL
• Ensure mechanical cursor is fi tted and in correct orientation with tool
• Screw selected nose jaws onto barrel of the tool.
• Open the nose jaws either by rotating the outer ring on cam operated jaws or by pushing outwards
the jaw ends, as illustrated below left.
• Connect the battery to the tool.
O RI G I NA L I NS TRU CTI O N
75–100% charged
51–74% charged
< 50% charged
Pack needs to be
charged
17