Photocell Adjustment; Deceleration Speed - SCS Sentinel SCS1 STANDARD Manuel D'installation Et D'utilisation

EN

PHOTOCELL ADJUSTMENT

DIP SWITCH 5 :
ON : When the photocells detect an obstacle while the gate is opening, the gate stops
and closes during 2 seconds.
When the photocells detect an obstacle while the gate is closing, the gate stops and
opens during 2 seconds.
If the gate auto-close is adjusted with the SWITCH 4 ON, and the photocells detect an
obstacle when the gate is totally opened, then the closing time will be reseted.
OFF : no detection by the photocells.
DIP SWITCH 6 :
disused
DECELARATION SPEED
The speed is 70% output of the full speed.
EN ::: 40