General Safety Precaution - SCS Sentinel SCS1 STANDARD Manuel D'installation Et D'utilisation

EN

GENERAL SAFETY PRECAUTION

WARNING :
This user manual is only for qualified technicians who is specialized in
installations and automations.
(1) All installations, electrical connections, adjustments and testing must be performed
only after reading and understanding of all instructions carefully.
(2) Before carrying out any installation or maintenance operation, disconnect the
electrical power supply by turning off the magneto thermic switch connected upstream
and apply the hazard area notice required by applicable regulations
(3) Make sure the existing structure is up to standard in terms of strength and stability
(4) When necessary, connect the motorized gate to reliable earth system during
electricity connection phase.
(5) Installation requires qualified personnel with mechanical and electrical skills.
(6) Keep the automatic controls (remote, push bottom, key selectors...etc) being
placed properly and away from children.
(7) For replace or repair of the motorized system, only original parts must be applied.
Any damage caused by inadequate parts and methods will not be claimed to motor
manufacturer.
(8) Never operate the drive if you have any suspect with what it might be faulty or
damage to the system.
(9) The motors are exclusively designed for the gate opening and closing application,
any other usage is deemed inappropriate. The manufacture should not be liable for
any damage resulting from the improper use. Improper usage should void all warranty,
and the user accepts sole responsibility for any risks thereby may accrue.
(10) The system may only be operated in proper working order. Always follow the
standard procedures by following the instructions in this installation and operating
manual.
(11) Only command the remote when you have a full view of the gate.
Please keep this installation manual for future reference.
EN ::: 26