Temperature Indicator - Proline DD415 WH Guide D'utilisation

Temperature indicator

To help you set your appliance correctly we have equipped your refrigerator
with a temperature indicator, it is located in the coldest area.
For the correct storage of food in your refrigerator and especially in
the coldest area, make sure the "OK" logo appears on the temperature
indicator. If "OK" does not appear, the temperature is set incorrectly.
As the "OK" indicator appears in black, it is difficult to see if the temperature
indicator is poorly lit. It is easier to read if properly illuminated.
Each time the temperature control of the appliance is changed, wait for the
temperature inside the appliance to stabilize before changing the setting
again, if necessary. Only change the position of the temperature control
gradually and wait at least 12 hours before checking again and making
any further changes.
NOTE: After loading the appliance with fresh food or after repeatedly opening the door (or
opening it for a long time), it is normal for "OK" to not appear in the temperature setting
indicator.
Location of food
Coldest area
Your food will store better if you place it in the best chilled area to suit
the type of food. The coldest area is just above the vegetable crisper.
The symbol opposite indicates the location of the coldest area of the
refrigerator.
The coldest area (0 °C to 4 °C) of the refrigerator compartment is
indicated by the sticker stuck to the left side of the wall.
EN -33-
OK