Replacing The Bulb; Transporting And Repositioning Your Appliance; Repositioning The Door - Proline DD415 WH Guide D'utilisation

Replacing the bulb

To replace the bulb in the freezer and refrigerator compartments:
1- Unplug your refrigerator
2. Remove the housing cover using a screwdriver.
3-Replace the bulb with an identical type of bulb not exceeding 15
W maximum.
4. Replace the cover.
5. Wait at least 5 minutes before reconnecting and setting the
thermostat to its original position.
Replacing the LED bulb
If the LED bulb in your refrigerator is defective, please contact your after sales service before
replacing the bulb.
TRANSPORTING AND REPOSITIONING YOUR
PART - 5.
APPLIANCE
• The packaging of the appliance and its polystyrene foam can be kept in case you need
to transport the appliance at a later date.
• When transporting the appliance, it must be fastened with a wide tape or a strong cord.
The rules on the packaging must be respected when transporting the appliance.
• Before transportation or changing the installation position, all moving objects (such as
racks, vegetable crisper, etc.) should be removed from the appliance or fixed with bands
in order to avoid accidents.
Transport your refrigerator in an upright position.

Repositioning the door

• It is not possible to change the opening direction of the door of your refrigerator if there
is a handle on the front of the door.
• However, it is possible to change the opening direction of the door on models without
a handle.
• If the opening direction of your refrigerator door can be changed, you must contact the
nearest authorized service to carry out the work.
EN -39-