Proline DD415 WH Guide D'utilisation page 42

Bubbling and splashing noise: This noise is caused by the movement of the refrigerant in
the tubes of the system.
Sound of water flowing: Normal sound of water flowing to the evaporation container during
defrosting. This noise may be heard during defrosting.
If the extremities of the refrigerator cabinet in contact with the door seal heat up:
Especially in summer (in hot weather), surfaces in contact with the seal can become hot
when the compressor is running. This is quite normal
If humidity builds up inside the refrigerator;
• Is all the food properly packaged? Are the containers dry before being placed in the
refrigerator?
• Is the refrigerator door opened frequently? The humidity in the room enters the
refrigerator when the doors are open. Moisture will form more quickly if you open the
doors more frequently, especially if the room humidity is high.
• The formation of water droplets on the rear wall after automatic defrosting is normal. (in
static models)
If the doors are not opening and closing properly;
• Is the food packaging preventing the door from closing?
• Are the door compartments, racks and shelves positioned properly?
• Are the door gaskets broken or twisted?
• Is your refrigerator installed on a flat surface?
Recommendations:
• To increase space and improve the appearance, the "cooling section" of refrigerators
is positioned inside the back wall of the refrigerator compartment. During operation,
this wall is covered with frost or water drops, depending on whether the compressor is
running or not. Do not worry. You need to defrost the appliance if there is an excessive
layer of frost on the wall.
• If you do not use the appliance for a long time (for example during the summer holidays),
defrost and clean the refrigerator as described in the "Cleaning and Maintenance"
section and leave the door open to prevent any formation of rust and odour.
• To completely stop the operation of the appliance, unplug it from the socket (for cleaning
and when the doors are left open).
Compliance information
• This appliance is designed for use in an ambient temperature between 16 °C and 43 °C.
• The appliance is manufactured in compliance with current standards.
EN -41-