Tempo Fitness 612T Manuel Du Propriétaire page 16

ASSEMBLY STEP 4
ALL
MODELS
END CAPS
SCREWS (H)
MAIN FRAME
16
HARDWARE BAG 4 CONTENTS :
SCREW (H)
12 mm
Qty: 4
Open HARDWARE BAG 4.
A
NOTE: lock latch must be securely engaged
before proceeding with assembly. (See folding
instructions in TREADMILL GUIDE.)
Attach the right END CAP using 2 SCREWS
B
(H). Repeat on the other side.
Connect power cord to a power outlet. The
C
ON/OFF switch is located next to the power
cord. Flip this switch to the 'ON' position. You
will hear a beep and the console will turn on.
Before the first use, lubricate the treadmill
D
deck by following the instructions in the
MAINTENANCE section in the TREADMILL
GUIDE.
612T
YOU ARE FINISHED!