Tempo Fitness 612T Manuel Du Propriétaire page 14

612 ASSEMBLY STEP 3
T
HARDWARE BAG 3 CONTENTS :
612T BOLT (E)
15 mm
ONLY
Qty: 4
ASSEMBLE
LEFT SIDE
FIRST
14
SPRING ARC
WASHER (F) WASHER (G)
6 mm 6 mm
Qty: 2 Qty: 2
BOLT (H)
SPRING WASHER (B)
55 mm
8 mm
Qty: 4
Qty: 4
CONSOLE
CABLE
SPRING WASHERS (F)
SPRING WASHERS (B)
* This step is for 612T model only.
ARC
Open HARDWARE BAG 3.
A
WASHER (D)
8 mm
Qty: 4
Slide each HANDLEBAR into the CONSOLE
B
and attach using 2 BOLTS (E), 2 SPRING
WASHERS (F) and 2 ARC WASHERS (G). Do
not completely tighten bolts until step D.
612T ONLY
Gently place the CONSOLE on top of the
C
CONSOLE MASTS. Attach the LEFT SIDE first
using 2 BOLTS (H), 2 SPRING WASHERS (B)
and 2 ARC WASHERS (D).
Attach the RIGHT SIDE of the CONSOLE using
D
CONSOLE
2 BOLTS (H), 2 SPRING WASHERS (B) and 2
HANDLEBAR
ARC WASHERS (D). Completely tighten all bolts
from steps B–D.
ARC WASHERS (G)
BOLTS (E)
NOTE: be careful not to pinch any
wires while attaching the console.
ARC WASHERS (D)
BOLTS (H)
CONSOLE MAST