Tempo Fitness 612T Manuel Du Propriétaire page 12

ASSEMBLY STEP 2
ALL
MODELS
LEAD WIRE
612T
RIGHT CONSOLE MAST
ARC WASHERS (D)
CONSOLE CABLE
12
HARDWARE BAG 2 CONTENTS :
BOLT (A) SPRING WASHER (B)
20 mm 8 mm
Qty: 4 Qty: 4
BOLTS (A)
SPRING WASHERS (B)
FLAT WASHERS (C)
BASE FRAME
FLAT WASHER (C)
8 mm
Qty: 2
Open HARDWARE BAG 2.
A
Pull LEAD WIRE through RIGHT CONSOLE
B
MAST. After pulling the lead wire through the
mast, the top of the CONSOLE CABLE should
be located at the top of the mast. Detach and
622T
discard the lead wire.
RIGHT CONSOLE MAST
With the RUNNING DECK lowered, attach
C
the RIGHT CONSOLE MAST to the BASE
FRAME using 2 BOLTS (A), 2 SPRING
WASHERS (B) and 2 FLAT WASHERS (C)
from the side and 2 BOLTS (A), 2 SPRING
WASHERS (B) and 2 ARC WASHERS (D)
from the rear.
ARC WASHER (D)
8 mm
Qty: 2
NOTE: Be careful not to pinch any wires
while assembling the right console mast.