HumanTechnik Signolux A-26140 Mode D'emploi page 10

We would like to congratulate you on pur-
chasing »signolux«. You have chosen a
modern and reliable alerting system. Kindly
read the user manual carefully in order to
start using the device properly and to famil-
iarise yourself with all the possibilities of the
system.
Standard delivery scope
Kindly check if all following parts are
included:
– »signolux« receiver
– 4 batteries LR14
– Wall mount
– 2 screws
– 2 wall dowels
– Operating manual
– Warranty card
Should any parts be missing, kindly contact
your specialist dealer or the manufacturer
directly.
Functioning principle
A »signolux« alerting system consists of at
least one transmitter (e.g. doorbell pushbut-
ton) ad a »signolux« receiver. Up to 8 trans-
mitters can be assigned to each event icon.
If e.g. the doorbell pushbutton is pressed, a
radio signal (radio impulses at 868,35 MHz)
are transmitted to the »signolux« receiver.
The receiver displays the received alerts
acoustically and visually with sounds and
light signals.
Safety instructions
– Prior to putting the device into operation
and using it, kindly read this manual thor-
oughly and in full.
– Keep this operating manual in a safe place
10 English
so that it is also accessible for other users
at any time.
– When using power tools always follow the
instructions of the manufacturer and wear
suitable protective equipment (e.g. pro-
tective goggles).
– Kindly check before starting to drill if there
are any hidden electric cables and water
pipes in the walls. In case of doubt we
recommend using a a cable detector.
Commissioning
1. Inserting the batteries into the
»signolux« receiver
a) At the rear side there is a battery com-
partment the cover of which can care-
fully be pushed downwards so that the
compartment opens ( fig. 1).
Figure 1: Battery compartment of the
»signolux« receiver
b) Now insert 4 alkaline batteries type LR14
(also called C batteries, included in the
delivery scope). Ensure correct polarity
of the batteries.
c) Close again the battery cover by care-
fully inserting the cover and pushing it
upwards.