DISPLAY Menu Screen (cont'd)
Item
Set Value
TIME/DATE
DISP+REC
● DISPLAY
OFF
When the mode switch is set
to VTR, DISP + REC changes
into OFF (D+R).
In this case, TIME/DATE is
neither
displayed
recorded.
● DATE+TIME Selects the style of the date and time indication and whether this
DISP STYLE
TIME
DATE
● ON
AUDIO LEVEL
OFF
CENTER MARK ● OFF
ON
OUTPUT CHAR.
OFF
● MIX
PAGE BACK
Selects whether the date and time should be shown on the LCD
screen or the viewfinder screen, and whether the indications
should be recorded on the tape.
DISP+REC : Displayed on the LCD screen or the viewfinder
DISPLAY
: Only displayed on the LCD screen or the
OFF
: Neither displayed nor recorded.
nor
The conditions for recording the date and time are selected with
the DATE REC item on the SYSTEM [2/2] menu screen.
Memo:
When DISP+REC is set, the ASPECT item on the SYSTEM [2/
2] menu screen is fixed at 4:3.
should be shown on the LCD screen and the viewfinder screen.
DATE+TIME : Date and time are shown.
TIME
: Time is shown.
DATE
: Date is shown.
Selects whether the audio level meters should be shown on the
LCD screen and the viewfinder screen.
ON : Displayed
OFF : Not displayed
Sets whether or not a centre mark is displayed.
ON : Displayed
OFF : Not displayed
Memo:
When the MODE switch is set to VTR (VTR playback /DV
mode), this item is not displayed.
Selects whether on-screen-indications are displayed on a
monitor connected to the VIDEO OUT or Y/C OUT connector.
OFF : On-screen-indications are not displayed
MIX : On-screen-indications are displayed
The DISPLAY [1/2] menu screen returns when the SELECT dial
is pressed.
Contents
screen and recorded on the tape.
viewfinder screen.
E-95