Audio Input Signal Selection - JVC GY-DV300 Manuel D'instructions

SETTINGS BEFORE
SHOOTING
The GY-DV300 is provided with three sources for audio input (i.e., built-in microphone and input connectors
MIC 1 and MIC 2 for external microphones).
Two channels of sound can be recorded on the tape in digital PCM format. Select for each channel (CH1
and CH2) which sound should be recorded on the channel. The sound of each of the input sources is
monaural.
Built-in microphone
MIC 1
input
connector
MIC 2
input
con-
nector
POWER
OFF ON
MODE
PUSH
CAM-B
CAM-A VTR
GAIN
SHUTTER
BAR
MENU
AW
FWD
AUDIO
CH-1 CH-2
MIC1
MIC2
REV
MONITOR
CH-1 CH-2
MIX
AUDIO
CH-1 CH-2
MIC1
MIC2
AUDIO input signal selector switch

Audio Input Signal Selection

Select whether the built-in microphone or a
microphone connected to the MIC 1 input
connector should be used.
The built-in microphone and a microphone connected to the MIC 1
input connector cannot be used at the same time.
When using the GY-DV300 with the built-in microphone or a
microphone connected to the MIC 1 input connector, select which
one to use by setting the MIC1 INPUT SEL item on the SYSTEM
[1/2] menu screen.
SYSTEM [1/2] menu screen
SY S T
M I C 1 I NP U T S E L
W I N D C U T M I C 1
W I N D C U T M I C 2
+ 4 8 V M I C 1
+ 4 8 V M I C 2
A UD I O MOD E
R E C MOD E
LONG P A US E T I ME 3 0 M I N
N E X T P AG E
PAG E B A CK
Select the input signal to the CH-1, CH-2 audio
channels
The audio signal input to the CH-1, CH-2 audio channels is selected
with the AUDIO input selector switch.
The input can be set separately for each channel.
Setting
The microphone sound from the built-in microphone
or a microphone connected to the MIC 1 input
MIC 1
connector.
(Make the selection with the MIC1 INPUT SEL item on
the SYSTEM [1/2] menu screen.)
The microphone sound from a microphone connected
MIC 2
to the MIC 2 input connector.
The same sound can be input to both the CH-1 and CH-2 channels.
Set to INT to use the built-in
microphone.
E M 1 / 2 ] [
Set to MIC 1 to use the micro-
I T N
OF F
phone connected to the XLR
OF F
OF F
input connector.
OF F
4 8 K
S P
Input Signal
E-49