How To Attach - JVC GY-DV300 Manuel D'instructions

PREPARATIONS
Using the optional KA-A33 microphone holder allows the optional microphone MV-P615U or MV-P618U
(phantom microphone) to be attached.
Mount the microphone holder on the microphone holder attachment base on the handle of the GY-
DV300.
Handle
Attachment
base
MIC 1
MIC 2
E-36
Attaching the Microphone (optional)
Microphone holder
attachment base
MIC 1 IN
MIC 2 IN
Screw
Knob Microphone
hole
holder
Attachment
screw

How to Attach

1.
Mount the microphone holder on the
microphone holder attachment base on the
handle of the GY-DV300.
1 Loosen the attachment screw on the
microphone holder.
2 Fasten the attachment screw on the
microphone holder to secure the holder to
the GY-DV300.
2.
Turn the knob on the microphone holder
anticlockwise to loosen it and open the
microphone holder.
3.
Place the microphone in the microphone holder.
Place the microphone toward the front to
prevent it from interfering with the cassette
cover.
4.
Turn the knob on the microphone holder
clockwise to secure the microphone.
5.
Connect the microphone cable to the MIC 1 or
MIC 2 input connector on the GY-DV300.
6.
Make sure to perform the correct setting for use
of a phantom microphone. (
Memo:
When using a microphone connected to the MIC
1 input connector, set the MIC1 INPUT SEL item
to XLR on the SYSTEM [1/2] menu screen.
See page 50.)