Start-Up And Shutdown; Operation Mode; Ventilating Your Room - Oceanic OL-BKY20-A010B2 Guide D'utilisation

5.3 SETTINGS

5.3.1 Start-up and Shutdown

Press POWER to turn the unit on.
The unit runs in FAN as default.
Press MODE button to select the desired operation mode.
Press POWER again to turn off the power.

5.3.2 Operation mode

The unit has four operation modes: Cool, fan, dry, sleep (only from the
remote control).
A. Cooling your room
Select the cool mode to lower the temperature in your room.
Press MODE button repeatedly until the LED of COOL operation lights up.
Press UP/DOWN button to adjust the temperature which is displayed on
the screen. The temperature can be set between 16℃ and 32℃.
Press SPEED button repeatedly until the desired fan speed indicator lights
up.
To control the direction of the air flow horizontally, please adjust the
inner louver by hand.
Note： The air conditioner stops if the room temperature is lower than
selected temperature.
B. Ventilating your room
Press MODE button repeatedly until the LED of FAN operation lights up.
In ventilation mode the room air is circulated, but not cooled.
Press SPEED button repeatedly to select the fan speed as desired.
61