Frigomat G20 02 Série Manuel D'utilisation Et D'entretien page 45


REMOVING AND CLEANING THE DOOR
 Turn the dispenser disk to maximum
opening position.
 Loosen the steel knob that fixes the door to
the front panel of the machine.
Handle the door with great care, supporting
it with a hand while loosening the knob:
because of its great weight, should it fall, it
could cause injuries to staff and damages
to objects.
 Rest the door on a clean work surface and
disassemble its parts:
- Loosen the plastic knob that blocks the
dispenser disk arm.
- Slide the arm from the pin.
- Recover the dispenser disk and the
relative thrust spring.
- Remove the disk OR gasket.
- Remove the OR gaskets positioned on
the fixed pipe of the drain outlet.
 Immerse
components into the tub with the sanitizing
solution and brush the surfaces with care.
Pay special attention to the holes, slots and
gasket seats.
the previously disassembled
ENGLISH - 20