Control Panel - Frigomat G20 02 Série Manuel D'utilisation Et D'entretien

6.2 CONTROL PANEL

1. ON/OFF key
With grey LED, by pressing the ON/OFF key it switches the
machine to ON and the LED turns green.
With green LED, by pressing the ON/OFF key it switches
the machine to OFF and the LED turns grey.
2. BUZZER key
With grey LED, by pressing the BUZZER key, the acoustic
warning is enabled at the end of the batch freezing cycle
when the timer reaches 0'.
With green LED, by pressing the BUZZER key, the acoustic
warning is excluded when the timer reaches 0'.
3. BEATER MOTOR SELECTOR SWITCH
Selector set at 0: the beater motor stops
Selector on 1 to the LEFT: the low speed freezing is
activated (anti-clockwise)
Selector on 2 to the LEFT: the high speed freezing is
activated (compressor OFF)
Selector on 1 to the RIGHT: the low speed extraction is
activated (clockwise)
Selector on 2 to the RIGHT: the high speed extraction is
activated (compressor OFF)
4. BATCH FREEZING TIMER
Using the batch freezing timer it is possible to set the
production time and consequently, vary the consistency and
the aspect of the product. The compressor is enabled
automatically by turning the knob and the production phase
is started.
To enable the compressor, the machine must first have
been switched to ON and it must be checked that the key
LED is green.
BUTTON CONTINUOUS COLD IN EXTRACTION (G60
5.
only)
With grey LED, pressing the button, you enable the
operation of the compressor and the LED turns green.
With green LED pressing the button, disable the
continuous working of the compressor and the LED turns
grey.
ENGLISH - 14