How The Hood Works - Sirius S-DD3 TC EM 50 Instructions D'utilisation Et Avis De Montage

EN

3/ HOW THE HOOD WORKS

Model SDD3 TOUCH CONTROL VERSION (Fig. 15)
OFF switch: (Fig. 15G) It is used to close the aspiration panel completely or to position it at in-
termediate heights at least mm 180 above the cooktop. While closing the aspiration panel keeps
on working at the speed set up to the height of mm 180 from the cooktop. Below this height
the aspiration function is automatically cut out.
On switch/+: (Fig. 15H) It is used to extract the aspiration panel up to the maximum height of
mm. 300 and to set automatically the first aspiration speed when reaching the height of mm
180 from the cooktop.
When pressing the button again after reaching this height, the aspiration motor speed can be
encreased.
If the aspiration panel is positioned at an intermediate height between mm 180 and mm 300,
the aspiration panel can start raising again by pressing first the OFF switch and then the On/+.
Switch.
Leds: (Fig. 15I) The different speed levels are indicated leds.
MINUS SWITCH: (Dis. 15L) it is working only if the position reached by the aspiration panel
is higher than mm 180 from the cooktop. It is used to decrease the aspiration motor speed.
TIMER SWITCH: (Fig. 15M) : it is used to stop automatically the aspiration system and to close
automatically the aspiration panel ten minutes it has been set.
21