Environmental Concerns - Progress PKG1440 Notice D'utilisation

Insert the small square (Hb) into guide
(Ha).
Put together the appliance door and the
furniture door and mark the holes.
8 mm
Hb
10. Remove the brackets. Install the nail (K)
8 mm far from the outer edge of the door.
8 mm
11. Place the small square on the guide
again and fix it with the screws supplied.

Environmental concerns

The symbol on the product or on its
packaging indicates that this product may
not be treated as household waste. Instead
it should be taken to the appropriate
collection point for the recycling of electrical
and electronic equipment. By ensuring this
product is disposed of correctly, you will help
prevent potential negative consequences for
the environment and human health, which
could otherwise be caused by inappropriate
waste handling of this product. For more
detailed information about recycling of this
Ha
K
Ha
Align the kitchen furniture door and the
appliance door by adjusting the part Hb.
Hb
12. Press the part Hd on the part Hb.
Hb
Hd
Do a final check to make sure that:
• All screws are tightened.
• The sealing strip is attached tightly to the
cabinet.
• The doors open and close correctly.
product, please contact your local council,
your household waste disposal service or the
shop where you purchased the product.
progress 29