Technical Data; Installation - Progress PKG1440 Notice D'utilisation

Technical data

Dimension of the recess
Rising Time
The technical information are situated in the
rating plate on the internal left side of the ap-
pliance and in the energy label.

Installation

Positioning
Warning! If you are discarding an old
appliance that has a lock or catch on the
door, you must ensure that it is made
unusable to prevent young children
being trapped inside.
Important! The appliance shall have the
plug accessible after installation.
Install this appliance at a location where the
ambient temperature corresponds to the cli-
mate class indicated on the rating plate of the
appliance:
Climate Ambient temperature
class
SN +10°C to + 32°C
N +16°C to + 32°C
Closing the door
1. Clean the door gaskets.
2. If necessary, adjust the door. Refer to "In-
3. If necessary, replace the defective door
Height
Width
Depth
Climate
class
ST
T
Electrical connection
Before plugging in, ensure that the voltage
and frequency shown on the rating plate cor-
respond to your domestic power supply.
Voltage can vary by ±6% of the rated voltage.
For operation with different voltages, a suit-
ably sized auto-transformer must be used.
The appliance must be earthed. The power
supply cable plug is provided with a contact
for this purpose. If the domestic power sup-
ply socket is not earthed, connect the appli-
ance to a separate earth in compliance with
current regulations, consulting a qualified
electrician.
stallation".
gaskets. Contact the Service Force Cen-
ter.
1446 mm
560 mm
550 mm
20 h
Ambient temperature
+16°C to + 38°C
+16°C to + 43°C
progress 25