Progress PKG1440 Notice D'utilisation page 27

Ventilation requirements
The airflow behind the appliance must be
sufficient.
min.
200 cm
Installing the appliance
Caution! Make sure that the mains
cable can move freely.
Do these steps.
1. Install the sealing strip.
a) Remove the strip cover.
b) Apply the adhesive sealing strip to
the appliance as shown in figure.
2
min.
200 cm
2
2. Install the appliance in the niche.
a) Push the appliance in the direction of
the arrows (1) until the upper gap
cover stops against the kitchen fur-
niture.
b) Push the appliance in the direction of
the arrows (2) against the cupboard
on the opposite side of the hinge.
3. Adjust the appliance in the niche. Align
the lower hinge with the kitchen furniture.
progress 27
2
1