Patek Philippe GENEVE PERPETUAL CALENDAR CHRONOGRAPH Mode D'emploi page 8

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 13
CAUTION
Please wind the watch and set the time before
you put the watch on. This prevents lateral
pressure on the winding stem. Please use
your fingernails to pull the crown out and
turn it gently between two fingertips.
Never pull out the crown in a humid envi-
ronment or underwater: the water resist-
ance of your watch is assured only when
the crown is pushed home.
We recommend that you wind your watch
fully at about the same time every day, pref-
erably in the morning.
Correction push pieces should be actuated
exclusively with the correction stylus that
was delivered with the watch. The use of any
other tool could damage your timepiece.
Do not perform any calendar or moon-phase
corrections between 5.30 p.m. and 2 a.m.
The calendar corrections must be performed
strictly in the order described below:
1. Move the hands to 6 a.m.
2. Set the date to the first day of the month
3. Correct the month and the leap-year
cycle
4. Correct the date
5. Correct the day of the week
6. Correct the moon phase
7. Set the time
12
PREPARATIONS
1. If your watch has stopped running, rewind it
fully before performing any corrections or adjust-
ments (50 clockwise turns of the crown).
2. You can be sure that performing adjustments is
safe if you first set your watch to 6 a.m.; observe
the color of the day/night indicator
3. Make sure to set the date
month with the correction push piece
11 and 12 o'clock.
DATE CORRECTION
To set the date , actuate the correction push piece
between 11 and 12 o'clock as many times as needed
to display the current date.
13
(white).
to the first day of the
between

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Ch 29-535 ps q

Table des Matières