HumanTechnik Signolux A-2655-0 Mode D'emploi page 14

- Alarm button (A-2935-S)
Plug the cable of the alarm button
directly into socket #2 of the
transmitter.
The alarm signal is triggered when-
ever the button is pushed (e.g. by
the occupant of a sick-bed).
- Water-alarm-sensor (A-2924-S)
Connect the water alarm sensor
with socket #2 of the transmitter. It
can be used for allmost all liquids.
Place the sensor with the supplied
double-sided adhesive tape in such
a way that the two contacts touch
the floor. As soon as a liquid touches
the contacts, the alarm is triggered.
After connecting the desired acces-
sory, register the transmitter with the
according receivers. When setting,
use a symbol matching the type of
alarm.
English 14
Mounting the »signolux«-transmitter
Important note:
Kindly keep in mind that metal parts
and other building materials may in-
terfere with the transmission of the ra-
dio signal. As they can be either visi-
ble or hidden at the desired mounting
location you should always carry out
a functional test at the mounting loca-
tion before starting the mounting pro-
cess, and, if required, choose a diffe-
rent mounting or installation location if
the reception is not guaranteed.
The »signolux«-transmitter can be
mounted using the supplied wall
mount. To use it, fix the wall mount
onto a wall (or rafter, cupboard etc.)
When mounting onto a brick- or stone
wall, you may need a power drill and
stone bit to do so. Use the supplied
wall plugs in this case. Once fixed,
hang the »signolux« transmitter onto
the wall mount bracket.