Other Precautions - Cristec YPOWER 12V-12V/60A Manuel Utilisateur

Precautions regarding dust, seepage and falling water
The charger / converter should be located so as to prevent
penetration of damp, liquid, salt and dust, any of which could cause
irreparable damage to the equipment and be potentially
hazardous for the user.
The appliance should be installed in a dry and well-ventilated
place.
Precautions regarding inflammable materials
The charger / converter should not be used near inflammable
materials, liquids or gases.
The batteries can emit explosive gases: please follow the
manufacturer's instructions carefully when installing them.
Near the batteries: ventilate the area, do not smoke, do not use
any open flame. Use fuses as defined in this manual.
The DC output fuses F1 and F2 should only be replaced by
the following blade fuse:
Manufacturer: LITTLEFUSE
Reference: 0287025
Reference: 166.7000.5202 Rating: 80V-20A
(See technical specifications).

Other precautions

Never attempt to drill or to machine the charger / converter 's case:
this may damage components or cause metal chips or filings to fall
on the charger / converter 's board.
Do not do anything that is not explicitly stated in this manual.
Rating: 32V-25A
30