Schellenberg RolloDrive 65 Premium Notice page 18

TECHNICAL DATA
Number of LED
Sound pressure level
Radio frequency
Signal strength
Range in a building / outdoor
Notes:
After a power failure, the settings will be permanently retained.
The specifications provided are recommended values and apply to ideal installa-
tion situations. Due to existing site conditions, the values may be different.
Only use the product with roller shutter belts with the dimensions indicated in the
„Technical data" table. Wrong shutter belt lengths and widths will result in dama-
ge. Replace the old shutter belt when the requirements are not met.
Caution: regularly check the paneling as well as the belt for their flawless con-
dition. In case of risk, decommission the system and have repairs executed by a
specialist�
Note: since the belt pulley in the roller shutter box loses its rigidity due to aging,
we recommend checking and if necessary replacing it after a prolonged usage
time�
If the maximum motor run time is exceeded by 4 minutes the motor will stop.
After approx. 60 minutes, the motor will have its full operational readiness again.
3
LpA < _ 70 dB (A)
868,4 MHz Schellenberg radio system
max. 10 dBm
ca. 20 m / 100 m
18