Technical Data - Schellenberg RolloDrive 65 Premium Notice

An easily accessible 230 V AC / 50 Hz mains socket outlet must be available at
the place of installation (see page 229).
The installation surface where the product is to be installed must be level and
suitable�
Only use original spare parts to avoid product malfunction or defects�
Improper running of the belt (belt guiding) may destroy the shutter belt and cause un-
necessary strain on the product. Install the product such that the belt enters the shutter
belt drive as vertically as possible� This will avoid unnecessary friction and wear�

TECHNICAL DATA

Power supply unit operating voltage
Rated power
Standby power
Torque
Short-time operation
Max. speed
Enclosure rating
Protection class
Number of switching times
Permissible ambient temperature
Automatic solar control setting
range
Setting range automatic twilight
function
Dimensions
Permissible belt widths
Belt length
Max. shutter surface area
Max. roller shutter weight
Power cord
Number operating buttons
230 V AC / 50 Hz
70 W
0,5 W
10 Nm
4 minutes
30 rpm
IP 20 (for dry rooms only)
II
2 (UP and DOWN)
0-40 °C
2.000 through 20.000 Lux
2 through 50 Lux
see page 217
23 mm (Maxi-belt)
7,6 m with belt thickness of 1,0 mm
6,2 m with belt thickness of 1,3 mm
5,2 m with belt thickness of 1,5 mm
6,0 m plastic
2
3,0 m aluminium/wood
2
4,5 kg/m plastic
2
10 kg/m aluminium/wood
2
2x0,75qmm H03VVH2-F
5
17
GB