Ce Declaration And Conformity; Intended Use - Schellenberg RolloDrive 65 Premium Notice

ments or lack of experience and knowledge, provided that they are supervised
or have been instructed in safe use of the device and know the risks involved�
Cleaning and maintenance must not be carried out by children unless they are
supervised�
Children must not be allowed to play with the roller shutter drive.

CE DECLARATION AND CONFORMITY

The belt winder (Item no
ments of European and national regulations. Conformity has been demonstrated.
The full EU Declaration of Conformity document can be found at:
http://www.schellenberg.de (under 'Download-Center', in the 'Service' tab).
Machinery Directive 2006/42/EC
Radio Equipment Directive (RED) 2014/53/EU
RoHS Directive 2011/65/EU
EMC Directive 2014/42/EU
Do not dispose of together with household waste� The product is recyc-
lable and can be deposited at a recycling center or a collection station
for electrical household garbage�

INTENDED USE

This product (Item no. 22767 / 22728) is intended exclusively for the operation of
belt-driven roller shutter systems. For this, the roller shutter system must comply
with the technical requirements of the product�
Any other or further utilization beyond the explicitly specified shall be regarded
as not intended use�
Alfred Schellenberg GmbH shall not be liable for any consequential damage,
property damage and personal injury due to improper use.
According to EN 13659, it must be ensured that the displacement requirements
as per EN 12045 are met for the hanging material. When unrolled, the displace-
ment at the lower edge must be at least 40 mm at an upward-directed force of
150 N. It must be ensured that the travel speed of the hanging must be less than
0�2 m/s in the last 0�4 m�
The roller shutter system and its parts must be in a perfect condition� Defects in
the system or its parts must be repaired before installing the product�
22767, 22728) meets the applicable require-
DE
16