Electronic Steering System Connection - Integra EPS ULTRAFLEX Instructions D'installation

ULTRAFLEX

3.5.6 Electronic steering system connection

SINGLE STATION
Connect the two output CAN bus cables (1) and (2) on the back of the electronic steering system to the four-way
PORT (3) and STARBOARD (4) connections respectively.
1
3
DUAL STATION
In case of dual station, it is necessary to add a CAN bus union tee (5) to both the four-way connections, as shown
in the picture and to connect the CAN bus output cables (6) and (7) from the second station. Reposition the terminal
plug (8) removed from the four-way connection on the union tee.
2
1
PORT
3
4
page 26
of 131 -
INTEGRA SYSTEM
2
STRB.
PORT
4
6
8
5
STRB.
7
Installation instructions
→
STARBOARD
→
PORT
→
STARBOARD
→
PORT