Control Panel Connection - Integra EPS ULTRAFLEX Instructions D'installation

ULTRAFLEX

3.5.5 Control panel connection

Connect all the devices located on the boat as indicated in the following table.
Positive battery pole
Buzzer
Negative battery pole
Connect the cable (1) provided with the female connector (2) located in the rear part of the panel. Make sure
you hear the connection noise (click) of the connector confirming the insertion.
Lower the safety lock (3) to prevent any accidental release.
page 24
of 131 -
INTEGRA SYSTEM
3A
Buzzer
Engine key
Engine key
2
3
1
PIN FUNCTION
1 Power supply (+30) 12V
2 GND
3 500 mA Buzzer (output)
Input frequency / Speed indicator
4
(Hz)
5 CAN L / SAE JS 1939
6 CAN H / SAE JS 1939
7 Ignition (+15) 12V
8
Resistive input ( 0 to 400 )
9 Resistive input
10 Light
11 Current input (4-20 mA)
12 Current input (4-20 mA)
Installation instructions
COLOUR NOTE
Red 3A external fuse
Black Negative pole
Connect to the
White negative pole (black)
of the buzzer
Green Engine speed
Blue SAE J1939
Blue-white SAE J1939
Connect to the panel
Yellow
key
Grey Fuel level
Brown Trim
Orange -
Light blue Fresh water
Violet Fresh water
CLICK!