Snooze Function - Cresta Care DTX690 Mode D'emploi

DAILY ALARM ON / OFF
1st press "ALARM" to activate the alarm 1 with A1 symbol showing.
•
press "ALARM" cancel the alarm 1, then activate the alarm 2 with A2 symbol
•
2
nd
showing
press "ALARM" to activate the alarm1 and alarm 2 with alarm symbols showing.
•
3 rd
press "ALARM" cancel all the alarms
•
4 th
Information:
•
The clock automatically changes from set-up mode to time mode if no keys are
pressed for 20 seconds.
•
The alarm sounds for 2 minutes if no key is pressed to stop it.

SNOOZE FUNCTION

To activate the snooze function, follow the steps below
Press the key "SNOOZE•LIGHT ", while the alarm sounds, to activate the snooze
•
function.
•
If the snooze function is activated, the alarm symbol is flashing.
•
The alarm repeats after 5 minutes.
•
The snooze function can be stopped by pressing any key.
12/24 HOURS MODE
The time display can be in 12 showing AM/PM or 24 hours mode, please follow the
manual set-up to select
°C/°F TEMPERATURE DISPLAY
The temperature display can be in °C or °F, please follow the manual set-up to select.
MAX./ MIN. FOR THE INDOOR / OUTDOOR TEMPERATURE AND HUMIDITY
"UP"
Press for displaying of indoor / outdoor maximum and minimum temperatures and humidities.
"UP"
Please hold for more than 3 seconds to clear up the max./min.
TEMPERATURE ALERT SET-UP
"
•
ALERT " to show the alert symbol.
Press
Press "UP" for more than 3 seconds, the upper limit of the inside temperature is
•
flashing. Use "UP"
Press "ALERT", the lower limit of the inside temperature is flashing. Use "UP"
•
"DOWN" to set the minimum alert temperature.
Press "ALERT", the upper limit of the outside temperature is flashing. Use "UP"
•
"DOWN" to set the maximum alert temperature.
Press "ALERT", the lower limit of the outside temperature is flashing. Use "UP"
•
"DOWN" to set the minimum alert temperature.
•
When the alert is activated, the alert symbol will be shown.
.
"DOWN" to set the maximum alert temperature.
and
and
and
and