You can manually adjust the clock to the time zone of a country (up to 1500km distance to
Frankfurt/Main) where the clock receives the DCF signal but where the actual time differs
from the time received.
If, e.g. the time in a given country is 1 hour ahead of the German time, set the time zone
display to 01. The clock is now DCF controlled but the time is one hour ahead.
Daily alarm set-up
•
Press "MODE" to switch from time display to A1 display
•
Press and hold the key "MODE" for 3 seconds ,the flashing alarm time are shown
•
The hour display of the alarm time is flashing. Use "" und "" to select the hour.
Press "MODE" to confirm.
•
then follow the minutes. Use "" und "" to select the minutes,
Press "MODE" to confirm.
•
Then press "MODE" to switch from A1 display to A2 display
•
The same setting as for A1.
Daily alarm on/off
•
When showing A1 alarm time, press "-" to activate the alarm 1 with alarm symbol showing.
•
Press "MODE" again cancel the alarm
•
When showing A2 alarm time, press "-" to activate the alarm 2 with alarm symbol showing.
•
Press "MODE" again cancel the alarm
•
A1 for alarm from Monday to Friday, A2 for alarm from Saturday to Sunday.
Information:
•
The clock automatically changes from set-up mode to time mode if no keys are pressed for
20 seconds.
•
The alarm sounds for 2 minutes if no key is pressed to stop it.
Snooze function
To activate the snooze function, follow the steps below
•
Press the key "SNOOZE/LIGHT", while the alarm sounds, to activate the snooze function.
•
If the snooze function is activated, alarm symbol is flashing.
•
The alarm repeat after 5 minutes.
•
The snooze function can be stopped by pressing any key.
12/24 hours mode
The time display can be in 12
° C/° F temperature display
The temperature display can be in ° C or ° F. Press t he key "-" to switch between the mode.
Max./ Min. for the indoor/outdoor temperature and humidity
Press "+" for displaying of indoor/outdoor max./min. of temperature and humidity.
AM/PM or 24 hours mode.
35