Moon Phase Display - Cresta Care DTX690 Mode D'emploi

•
Rain fall can be shown in mm and inch, please follow the manual set-up to select
the mm/inch.
Press "DOWN"
•
to show the rainfall in 1 hour, press again 24 hours, then TOTAL.
•
"DOWN"
Press for more than 3 seconds to clear up the volume accordingly, such
as if showing 1 hour, clear up the data in 1 hour, others unchanged, if showing
24 hours, clear up the data in 24 hours, others unchanged.
•
The max. of the rainfall is up to 999.99mm (99.99inch), the display is flashing in
case of the max.,
you have to clear up the data by hand, otherwise, the data can not be
updated any more.
ILLUMINATION
Press the key "SNOOZE•LIGHT" to activate the display illumination for 8 seconds.

MOON PHASE DISPLAY

The weather station uses saved data to show the moon phase
A B C D
A: New moon
D: increasing 3/4
G: Last half
LIVING SPACE HUMIDITY
The weather station uses saved data to determine the humidity in the living space and shows the
respective symbols.
comfortable dry
LOW BATTERY CONDITION DISPLAY
The weather station displays the low battery condition symbol to remind you that the
batteries of the weather station or the outdoor sensor need to be exchanged.
E F G H
B: increasing crescent
E: Full moon
H: decreasing crescent
humid
C: First half
F: decreasing 3/4