Cresta Care DTX690 Mode D'emploi page 20

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

bracket to allow the wind to travel around the sensor from all directions. Please follow
the below display :
Mounting the wind direction sensor to the first plastic bracket: first check the wind
direction sensor before fixing, there is one cable from wind speed sensor, please insert it
into the socket under. please follow the below display:
Mounting the rain sensor to the second plastic bracket: there are vertical engraved lines
at the bottom edge of the round cover and the sensor part, you only need to adjust the
two line into one position, then turn clockwise, the rain sensor part will be connected
well, then fix them with 4 screws onto the plastic bracket ( don't use only 2 screws )
please follow the below display:

Publicité

Table des Matières
loading

Table des Matières