Installing The Tv On The Wall - Sony SU-WL450 Mode D'emploi

Screw
(+PSW 6 x 20)

Pulley 
Soft cloth
3
Connect the necessary cable(s)
to the TV.
Make sure to connect the cables before
installing the TV on the wall. You will be
unable to connect the cables when the TV
is installed.
Refer to the Reference Guide supplied with
your TV.
Note
 Subcontract the cable routing in the wall to a licensed
contractor.
 Bundle the connecting cables to prevent stepping on
them before wall mounting.
Screw
(+PSW 6 x 20)

Spacer
(20 mm)

Belt 
− 14 (GB) −

Installing the TV on the wall

WARNING
 Be sure that two or more persons (three or more
persons for 75 inches and above TV set) hold the TV
when carrying it.
1
Lift the TV.
 For the location of the Pulleys  to the
hang on the Base or Base Adaptor, refer
to the table of step 3 in "Installing the
Wall-Mount Bracket to the wall" on
page 9.
 Make sure that the rear of the TV
touches the Base or Base Adaptor when
holding the TV.
Note
 Hold the TV securely with both hands.
