Checking The Parts - Sony SU-PF3M Mode D'emploi

To Sony dealers
Be sure to thoroughly read the
safety precautions described above
and pay special attention to safety
during the installation, maintenance,
checking, and repair of this product.
Be sure that two or more persons do
the installation work.
Be sure that two or more persons install the TV on the
Floating Stand. If one person does the installation work
alone, this may result in an accident or injury. Be sure
to keep children away during the installation.
Be careful not to injure your hands or
fingers during installation.
Be careful not to injure your hands or fingers when
installing the TV on the Floating Stand.
Be sure to install the TV securely
following the instructions.
Tighten the screws securely. If the TV is not installed
securely, it may fall and cause injury.

Checking the parts

Name
Floating Stand
Pillars
Illustration shown above is SU-PF3M.*
Rear panel securing screw
M6 × L25
Glass shelf
Securing screw (for glass shelf)
Cable band
Cable band screw
TP4 × 16
Be sure to have a Phillips screwdriver that fits the
screws indicated above prior to the assembly.
* Model SU-PF3M is used for illustration purposes in
the installation procedure.
Quantity
Rear panel
1
6
1
4
2
2
5
(GB)