Video Resolution - Spypoint BLOODLINE Manuel De L'utilisateur

RESOLUTION 2.0 GB 4.0 GB
5 MP 1190 2380
6 MP 952 1904
8 MP 635 1270
10 MP 595 1190
12 MP 476 952

vIDEO RESOLUTION

320 x 240 45 min 1h30
640 x 480 30 min
In « PHOTO » or « VIDEO » mode, if the card is locked, the
panel indicates « LOC » and the light in the front of the camera
winks quickly.
SETTINGS
Date, Time, Temperature and Picture Quality
Turn « OFF » your camera; set switch « MODE » to « SET/
TEST » and turn « ON » the camera. Press « MENU/OK ».
An « H » will flash on the screen indicating that the camera
is in High Resolution (7 MP). Use the « DOWN » button
if you want to reduce the resolution to « L » (3 MP). Press
« MENU/OK » to set the date and time. (mm/dd/yy, hh/mm) Use
« UP » and « DOWN » to change the blinking digit. Choose « F » or
« C » to display the temperature in Fahrenheit (°F) or Celsius
(°C). Press « MENU/OK » to go to the next option. Once
finished, press « MENU/OK » and turn « OFF » the system to
save the changes.
MODE
When the « PHOTO » or « VIDEO » mode is selected, the
test light in the front of the camera flashes for 60 seconds to
allow the user to leave without being photographed or filmed.
When the « SET/TEST » mode is selected, no picture or video
is recorded.
Walk perpendicularly in front of the camera.
the camera detects movement, the light winks to indicate that
normally, a photo or video would be recorded.
not detect the movement, increase the distance detection using the
« DISTANCE »
wheel or realign the system differently. When you
understand how the device responds to detections, you can better
adjust the direction or the height of the installation.
switch is set to « VIEW », you can view the recorded pictures
or videos on television.
7
8.0 GB 32 GB
4760 19040
3808 15232
2540 10160
2380 9520
1904 7616
3h 12h
1h 2h 8h
When
If the system does
When the