Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
8
Test light
How to properly install your camera
using the supplied installation strap:
(Recommended installation height: about 3 feet).
DELAY
To select the time interval before the camera records another
photo or video.
Additional setting: It is possible to reduce the delay between
detections to 10 seconds (instead of 1 minute) with the following
procedure. Note that the battery life will be affected.
Turn OFF the camera. Press and hold the UP button, turn
the camera on. "10_S" appears on the screen meaning the 1
minute delay has been replaced by a 10 second delay. To reset
the camera to 1 minute delay, follow the same procedure.
"1_M" appears on the screen (see figure below).
10_5
10 sec. delay
MULTI-SHOT
To take up to 4 consecutive shots at each detection. The delay
between each photo is 10 seconds with the infrared module and
15 seconds with the flash module. This option is available in
PHOTO mode only.
VIDEO LENGTH
Allows you to select the recording duration when the camera is
set in VIDEO mode.
1 min. delay
Publicité
Table des Matières
