Keysight U1251B Guide De Démarrage Rapide page 12

Performing Resistance, Conductance, and
Continuity Measurements
1 Set the rotary switch to
2 Connect the red and black test leads to input
3 Probe the test points (by shunting the resistor)
4 Press
12
Audible
continuity
terminals Ω (red) and COM (black)
respectively.
and read the display.
to scroll through audible
continuity, conductance, and resistance tests
as shown.
Keysight U1251B and U1252B Quick Start Guide
.