CAME G4040Z Manuel D'installation page 41

Programming the features
ON
1 2 3 4 5 6 7 8 9 10
DIP-SWITCH Description of functions
1 ON AUTOMATIC CLOSING (1 OFF - deactivated)
2 ON ONLY OPEN from button 2-7 and/or from transmitter (with AF card fitted)
2 OFF OPEN-CLOSE-INVERT from the button on 2-7 and/or from a transmitter (with AF card fitted)
3 ON 24 V output on 10-E during the boom's movement phases and when it is in closed position
3 OFF 24 V output on 10-E during the boom's movement phases
4 ON MAINTAINED ACTION (4 OFF - deactivated)
5 ON PRE-FLASHING when opening and closing (pre-flashing duration: 5 seconds) (5 OFF - deactivated)
6 ON OBSTRUCTION DETECTION with motor idle (6 OFF - deactivated)
7 ON SLAVE piloted motor ( 7 OFF - deactivated)
8 OFF IMMEDIATE CLOSURE of the boom (8 ON - deactivated)
9 OFF TOTAL STOP (9 ON - deactivated)
10 ON BRAKING ACTION of the boom when closing (10 OFF - deactivated)
Trimmer adjustments
ON
1 2 3 4 5 6 7 8 9 10
Trimmer Description of functions
Sensitivity
SENS It adjusts the obstruction detection sensitivity during gate movement.
Minimum sensitivity (-) or maximum sensitivity (+).
Automatic Closing Time
A.C.T. It regulates the open barrier's waiting time. Once this time elapses, a closing maneuver automatically takes place.
The waiting time may be adjusted to between 1 and 120 seconds
Default settings
ON
OFF