CAME G4040Z Manuel D'installation page 34

Balancing the boom
Before balancing the boom, check on the table below for congruences between the chosen spring, accessories and passage clearance.
PASSAGE CLEARANCE 8(max 3.75 m)
BOOM LENGTH (m)
Boom with shock-proof profile
Boom with shock-proof profile and 001G028401
luminous cord
Boom with 001G0465 skirt
Boom with 001G028401 luminous cord and
001G0465 skirt
Boom with shock-proof profile and 001G02808 swing
rest
Boom with shock-proof profile, 001G028401 luminous
cord and 001G02808 swing rest
 The boom includes the transparent groove cover and end cap.
⚠ WARNINGS!
001G02802 Cannot be used on barriers fitted with the 001G0465 skirt or 001G02808 swing rest
001G02808 For passage widths of up to 3 m.
001G02807 MUST be used with passage widths exceeding 3 m.
001G0465 - 001G02808 Cannot be used together.
Release the gearmotor and position the boom vertically . Lock the gearmotor again.
Tighten the eyelet rod under the spring . The spring should be screwed to the anchoring pin .
1
A
Spring 001G02040 Ø 40 mm
1,5 ÷ 1,75
A
A
A
A
A
A
B
Spring 001G04060 Ø 50 mm
1,75 ÷ 2,25 2,25 ÷ 2,75
A A
A B
B B
B B
B B
B B
C
Spring 001G06080 Ø 55 mm
2,75 ÷ 3,25 3,25 ÷ 3,5
B B
B B
C C
C C
C
C
3
2
3,5 ÷ 3,75
C
C