Mobile Station; Start-Up - Roco CV29 Manuel D'utilisation

Operation with Märklin

Mobile Station

1)
Start up
1. Creating the carriage (same as creating a new locomotive):
 Press ESC
 "NEW LOC" --> press OK
GB
"Database" --> press OK --> rotate to Loc 37540 --> press OK `BR55´
You have now successfully created the carriage but this is still at another address.Change the address as
follows:
2. Setting the address
 Press ESC
 Rotate to the right "EDIT LOC" --> press OK
 "Address" --> press OK
 Rotate. e.g. to address "5/6 --> press OK
 "PRG LOC?" --> press OK
The carriage has now been successfully programmed at the new address (a beep sounds 3 times)
3. Setting the function keys:
 Press ESC
 Rotate to the right "EDIT LOC" --> press OK
 Rotate 2x to the left to "REG" --> press OK
 Rotate until REG "61" flashes" --> press OK
 Rotate until REG 61: "3" flashes" --> press OK (lamps flash)
The carriages have now been programmed with the corresponding function key mapping (a beep sounds
3 times).
4. Changing the name:
 Press ESC
 Rotate to the right "EDIT LOC" --> press OK
 Rotate to the right "NAME" --> press OK
 Change letters with rotary knob
 Continue by pressing the rotary knob
 Return by pressing ESC
 Finish with OK
22
8045868921.indd 22 01.02.2010 13:51:38