Configuration (Cv29); Combinations For Cv29; Resetting To The Default Setting - Roco CV29 Manuel D'utilisation

Configuration (CV29)
Decoder configurations are possible via CV29. In the CV list, each of the configurations has a value. The
required settings (values) are to be added and CV29 programmed with them.
Bit 0 (value 1 or 0) changes the direction if the carriage is coupled to the locomotive the wrong way round.
The tail lamp is now conform with the direction.
Bit 1 (value 2 or 0) comprises the number of speed steps. This is important for a correct, direction-related
illumination of the tail lamp and must be conform with the running step setting/operation in the mul-
ti MAUS/ multi MAUS
indication of an incorrect speed step setting.
Bit 2 (value 4 or 0) switches the analogue operation on or off.
Bit 5 (value 32 or 0) switches the „long address" mode on or off.

Combinations for CV29

CV29 Bit 0
Direction of
Travel
normal
other way
round
normal
other way
round
normal
other way
round
normal
other way
round
Carriage configuration via CV62 (conductor's carriage)
You can make additional carriage settings with regard to the conductor and the door movement via CV62.
In the works settings, the carriage is defined as being the conductor's carriage (CV62 = 7), i.e. the conductor's
announcement and whistle sound can be automatically heard when closing in addition to it being manually
hear from this carriage via F16, F17. If the conductor function should be deactivated for this carriage, pro-
gram CV62 with the value 0. Please refer to the CV list (pages 18-19) for other setting possibilities.

Resetting to the default setting

The CV settings of the carriage are reset to the default setting by value 8 being programmed at CV8.
The door mechanic of the carriage goes to the starting state when you program value 7 at CV7.
8045868921.indd 17
controller. A flashing of the tail lamp when rotating the running controller is an
pro
Bit 1
Speed Operating Mode
Steps
14
14
28/128
28/128
14 analogue+digital
14 analogue+digital
28/128 analogue+digital
28/128 analogue+digital
Bit 2
Value
Short address
digital 0
digital 1
digital 2 (default)
digital 3
4
5
6
7
GB
Bit 5
Value
Long address
32
33
34
35
36
37
38
39
17
01.02.2010 13:51:37