Tools Required - R&G AB0006BK Instructions De Montage


Socket set to include a 12, 17 and 18mm sockets and wrench (the 17mm should be a deep socket).
A
Left-hand side (as you sit on bike)

Remove the engine/frame mounting bolt labelled 'A' in picture 1 (please note this bolt has an in-
board nut which is reused on assembly).

Remove the engine/frame mounting bolt labelled 'B' in picture 1.
Unit 1, Shelley's Lane, East Worldham, Alton, Hampshire, GU34 3AQ
Tel: +44 (0)1420 89007 Fax: +44 (0)1420 87301

TOOLS REQUIRED


T55 Torx bit and wrench.

Set of Allen keys to include 5mm A/F.

Torque wrench (up to 40Nm).
B
C
PICTURE 1
FITTING INSTRUCTIONS
R&G Racing
www.rg-racing.com Email: info@rg-racing.com