Error Message/Trouble Shooting; Cleaning And Storing The Device And Cuff; Technical Specifications - Beurer BM 49 Mode D'emploi

• If you continue to press the
Memory button , the most re-
cent individual measured values
are displayed in turn with the
date and time.
• The measured values in the cor-
responding user memory can
be deleted by switching on the
device, selecting the desired user
memory and pressing the func-
tion buttons and simultane-
ously for 5 seconds .
• The device will go directly into
standby mode (clock mode).

8. Error message/trouble shooting

In the event of errors, the error message _ appears on the display.
Error messages can occur when
1. it was not possible to record the pulse (
2. you move or speak during the measurement (
3. the cuff is fastened too tightly or loosely (
Voice output when voice function
is active
Memory space ...
Systole ... mmHg
Diastole ... mmHg
Heart rate ... beats per minute
According to the WHO guide-
lines your blood pressure is ...
All the counts in the memory
have been erased.
),
),
),
4. errors occur during the measurement (
5. the pump pressure is higher than 300 mmHg (
6. the batteries are almost empty (
In such cases, repeat the measurement. Ensure that the cuff line is cor-
rectly attached and that you do not move or speak during the measure-
ment.
If necessary, reinsert or replace the batteries.

9. Cleaning and storing the device and cuff

• Clean the device and cuff carefully using a slightly damp cloth only.
• Do not use any cleaning agents or solvents.
• Under no circumstances hold the device and cuff under water, as this
can cause liquid to enter and damage the device and cuff.
• If you store the device and cuff, do not place heavy objects on the
device and cuff. Remove the batteries. The cuff line should not be bent
sharply.

10. Technical specifications

Model no. BM 49
Measurement method Oscillometric, non-invasive blood pressure meas-
urement on the upper arm
Measurement range Cuff pressure 0 – 300 mmHg,
systolic 50-250 mmHg, diastolic 30-200 mmHg,
Pulse 40 –180 beats/minute
Display accuracy Systolic ± 3 mmHg, diastolic ± 3 mmHg,
pulse ± 5 % of the value shown
73
),
),
).