Unit Description; Preparing The Measurement - Beurer BM 49 Mode D'emploi

emissions or a decrease in the device's electromagnetic immunity; this
can result in faulty operation.
• Failure to comply with the above can impair the performance of the
device.

3. Unit description

2
3
1
10
1. Cuff
2. Cuff line
3. Cuff connector
4. Display
5. Connection for mains part
6. Memory button
7. START/STOP button
8. Function buttons
9. Risk indicator
10. Connection for cuff connector
4
9 5
6
8
7
Information on the display:
1. Inflate , release air
2. Systolic pressure
3. Memory display:
average value ( ),
morning ( ), evening (
4. Diastolic pressure
5. User memory
6. Calculated pulse value
7. Cardiac arrhythmia symbol
8. Time and date
9. Risk indicator
10. Memory space number
11. Battery replacement symbol

4. Preparing the measurement

Insert the batteries
• Open the battery compartment lid.
• Insert four 1.5 V AA (alkaline type LR6)
batteries. Make sure that the batteries
are inserted with the correct polarity,
according to the label. Do not use re-
chargeable batteries. The message "The
device is ready for use. You may start
measuring." is displayed.
• Close the battery compartment lid again carefully.
• With inserted batteries, the unit permanently displays the
time and date.
66
11
10
)
9
8 7
4 x AA (LR6) 1,5 V
1
2
3
4
5
6