Beurer BM 49 Mode D'emploi page 70

You have 2 memories, each with
60 memory spaces to store the
measurements of 2 different people
separately.
Performing the blood pressure measurement
• As described before, attach the
cuff and adopt the posture in
which you want to perform the
measurement.
• Switch on the device with the
Start/stop button.
• A display check is performed, during
which all display segments light up.
• Start the device with the Start/
stop button. The memory
space that will be used is dis-
played.
Voice output when voice function
is active
Voice output when voice function
is active
The device is ready for use.
You may start measuring.
• The cuff is inflated to 190 mmHg.
The cuff's air pressure is slowly
released. If a tendency for high
blood pressure is already recog-
nised, the cuff is reinflated and
the cuff's pressure is increased
again. As soon as a pulse is de-
tected, the symbol flashes.
Measuring can be cancelled at
any time by pressing the Start/
stop button .
• Systolic pressure, diastolic pres-
sure and pulse measurements
are displayed.
70
Voice output when voice function
is active
Systole ... mmHg
Diastole ... mmHg
Heart rate ... beats per minute
According to the WHO guide-
lines your blood pressure is
– optimal
– normal
– high to normal
– shows slight hypertension
– shows medium hypertension
– shows strong hypertension