Storage And Transport; Removal Of Parts; Technical Specifications; Structure - lopital Nemo Mode D'emploi

5. Storage and transport

During transport and storage, the ambient conditions must remain moderate. In other
words, the temperature should remain between -40°C and +55°C (-40°F to 130°F) and
humidity levels should be kept as low as possible.
Vibration during transport must be kept to a minimum in order to avoid damaging
the hinged mechanisms on the chair.

6. Removal of parts

All parts that are replaced or removed can be sent back to Lopital BV. You may also offer
the parts to the engineer for destruction. We will ensure that all parts are processed in
an environmentally-friendly manner.
7. Technical specifications
The Nemo is splash-proof. This is indicated by the IPX4 mark.

7.1. Structure

Frame:
Hinge points:
Wheels:
Body support :
Weight:
Maximum permitted load:
Weight comfort leg support:
Stainless steel, steel tubes and plates equipped with
a two-layer powder coating
Stainless steel
Plastic, Ø 12.5 cm / 4.9 inch, double blocking facility
PUR (polyurethane).
24 kg / 52.9 lbs
150 kg / 330 lbs
3.6 kg / 8 lbs per unit
Nemo Shower-toilet chair | Instructions for use | 35