Pleion EGO Smart.Solar.Box 110 Mode D'emploi page 22

General layout
Standard installation.
N
O
D
D
H
B
A
D G
C i E
F
COLD
Max 1,5m Max 1,5m
WATER
i
INLET
max 3BAR
The connection drawing that is represented,
just like those on the following pages, is
purely indicative and only indicates how
to connect the hydraulic connections and
install the main supplied components and the
requested accessories.
LEGENDA:
STANDARD
OBLIGATORY
 
SUPPLY
OPZIONAL, CAN BE
COMPONENT  RECOMMENDED
REQUESTED
OPTIONAL X NOT AVAILABLE
inflow line from the water
A - -
system
water filter
B  X
pressure reducer
C OPZ

(adjusted at 3 bar)
D interception valve X

safety and one-way valve
E
 
(setting 5,0 ± 0,3 bar)
F discharge tap  X
G flexible hose  X
Rev. 4.0 del 16|03|2022
Hydraulic connection mod. 110/180/260
The solar collector with integrated storage is equipped
with 2 connections with 3⁄4" M thread for connection to
the line using flat gaskets (supplied).
M G
HOT WATER
I
L
The components surrounded by a broken line, identified by this
icon, make up a basic set that is always present in all possible
system configurations. For simplicity, these components are
not shown in other hydraulic drawings, but their presence is
indicated by the relative icon.
Hydraulic connection is the responsibility of the installer;
he/she has the task of verifying if what is indicated in this
manual complies with laws and regulations in force at the
installation place. The manufacturer is not liable for any
damage caused to things and injury to people as a result of
installation carried out in a manner that is not state-of-the-
art, and without respecting local regulations and laws.
OBLIGATORY
 
OPZIONAL, CAN BE
COMPONENT  RECOMMENDED
OPTIONAL X NOT AVAILABLE
H expansion vessel 
electric resistance for
I integration OPZ
(1,000 and 2,000 W)
antifreeze electric
L resistance OPZ
(300 W)
M backflow preventer 
N thermostatic mixer valve 
O inflow line to the user -
42
Hydraulic connection mod. 150/220
General layout
Standard installation.
N
D
O
D
COLD
OUTLET
D
WATER
INLET
A
C
B i
The connection drawing that is represented, just like
those on the following pages, is purely indicative and only
indicates how to connect the hydraulic connections and
install the main supplied components and the requested
accessories.
LEGENDA:
STANDARD
SUPPLY
COMPONENT
REQUESTED
inflow line from the water
X A
system
B water filter
OPZ
pressure reducer
C
(adjusted at 3 bar)
interception valve
OPZ
D NA (normalemte aperta)
NC (normalmente chiusa)

safety and one-way valve
E
(setting 5,0 ± 0,3 bar)
OPZ
F discharge tap
-
G flexible hose
The solar collector with integrated storage is equipped
with 2 connections with 3⁄4" M thread for connection to
the line using flat gaskets (supplied).
HOT
WATER
OUTLET
D M
G
I
H
G
D E
F
Max 1,5m Max 1,5m
i
The components surrounded by a broken line, identified
by this icon, make up a basic set that is always present
max 3BAR
in all possible system configurations. For simplicity, these
components are not shown in other hydraulic drawings,
but their presence is indicated by the relative icon.
Hydraulic connection is the responsibility of the installer; he/
she has the task of verifying if what is indicated in this manual
complies with laws and regulations in force at the installation
place. The manufacturer is not liable for any damage caused to
things and injury to people as a result of installation carried out
in a manner that is not state-of-the-art, and without respecting
local regulations and laws.
STANDARD
OBLIGATORY
 
SUPPLY
OPZIONAL, CAN
 RECOMMENDED COMPONENT
BE REQUESTED
NOT
OPTIONAL X
AVAILABLE
H expansion vessel
-
-
electric resistance for
 X
I integration
(1,000 and 2,000 W)
 OPZ
antifreeze electric
L resistance
(300 W)
 X
M backflow preventer
 
N thermostatic mixer valve
X

O inflow line to the user
 X
43
L
STANDARD
OBLIGATORY
 
SUPPLY
OPZIONAL, CAN
 RECOMMENDED
BE REQUESTED
NOT
OPTIONAL X
AVAILABLE
X

OPZ OPZ
OPZ OPZ
 
 OPZ
- -