Water Connections; Filter Cleaning - AERMEC CHF 17 Manuel D'utilisation Et D'installation

INSTALLATION

Water connections

The CHF recessed box allows different types of water connec-
tion; said connections must include three suitably sized pipes
(water inlet and outlet, condensate drain), the possible connec-
tions, represented graphically in the figure, are:
The choice among these options depends on the solutions adopted for the construction of the hydraulic system. It is therefore
possible to choose the most advantageous solution on the basis of the different requirements.
MAINTENANCE

Filter cleaning

To clean the filter, consult the fan coil manual.
To reach the filter remove the front panel, rotate the retainers
by 90° and extract the filter from the fan coil as indicated in
the figure.
After cleaning the filter, refit it in its housing, lock it with the
ACHFUJ 1103 - 4689580_01
16
A
A
B
A - from below (recommended connection).
B - from the back.
C - from the left side.
two retainers and refit the front panel.
Warning: if the filter is damaged, it must be immediately repla-
ced. The fan coil must not operate without the filter.
C