Electrical Connections - AERMEC CHF 17 Manuel D'utilisation Et D'installation

INSTALLATION

Electrical connections

The CHF recessed box allows different types of electrical con-
nections; said connections must include two suitably sized
A - from below with power box (recommended connection).
C - from the right side.
Whatever connection you decide to follow, the earth
connection must be made (as indicated in the figure)
between the CHF recessed box and the indoor unit;
the connection cable, supplied with the kit, has two
quick-release contacts to simplify the connection ope-
ration.
The choice among these options depends on the solutions adopted for the construction of the electrical system. It is therefore
possible to choose the most advantageous solution on the basis of the different requirements.
The installation of the electrical box illustrated in the figures is a solution, by way of example, tested by Aermec with Gewiss pro-
ducts. This electrical box is not supplied.
ducts (machine power, fan control); the possible connections
are shown in the figure:
B - from the side holes with power box.
D - from below.
ACHFUJ 1103 - 4689580_01
15